-
Products
- Video LCD Module
- Touch Panel
- TFT LCD Panel
- TFT LCD Panel
- T5L Evaluation Board
- Switching Power Supply
- LVDS LCD Module
- Linux LCD Module
- IoT Application
- HMI LCD Module
- HDMI LCD Module
- COF UART LCD Module
-
COB UART LCD Module
- 9.7 Inch
- 8.8 Inch
- 8 Inch
- 7.8 Inch
- 7.4 Inch
- 7 Inch
- 6.8 Inch
- 5.7 Inch
- 5.6 Inch
- 5 Inch
- 4.3 Inch
- 4.1 Inch
- 4 Inch
- 32 Inch
- 3.7 Inch
- 3.5 Inch
- 3 Inch
- 27 Inch
- 23.8 Inch
- 21.5 Inch
- 2.8 Inch
- 2.4 Inch
- 2.1 Inch
- 2 Inch
- 18.5 Inch
- 17.3 Inch
- 15.6 Inch
- 15 Inch
- 14 Inch
- 13.3 Inch
- 12.1 Inch
- 11.6 Inch
- 10.4 Inch
- 10.1 Inch
- 1.6 Inch
- 1.54 inch
- 1.3 Inch
- Android LCD Module
- Catalogue
3.5 Inch T5L Function Evaluation Board Model:EKT035A
Video Specification ASIC Information T5L ASIC Designed by DWIN. Mass production in 2019, 1MBytes Nor Flash on the chip, 512KBytes used to store the user database. Rewrite cycle: over 100,000 times Display Color 262K(262144)colors LCD Type IPS Viewing Angle Wide viewing angle, 85°/85°/85°/85° (L/R/U/D) Display Area(A.A) 70.08mm (W)×52.56mm (H) Resolution 320×240 Pixel Backlight LED Brightness EKT035A: 270nit 100 levels adjustment.(It's not recommend to set brightness to 1%~30% of the maximum, which may lead a flicker) LED Lifetime ≥20000H(Continuous working with maximum brightness, time of the brightness decays to 50%) Voltage & Current Power Voltage 6~36V Operation Current VCC = +12V, Backlight on,90mA VCC = +12V, Backlight off,30mA Reliability Test Working Temperature -20~70℃ (Typical 25℃) Storage Temperature -30~85℃ (Typical 25℃) Working Humidity 10%~90%RH (Typical 25℃) Interface Socket 50Pin-0.5mm FCC USB YES SD slot YES (SDHC/FAT32 Format) Memory Flash Space of Font: 4-12Mbytes Picture Storage:12-4Mbytes RAM 128Kbytes Nor Flash 512Kbytes UI & Peripheral UI Version TA / DGUSⅡ (DGUSⅡ pre-installed) Peripheral Capacitive touch panel, Buzzer Dimension Dimension 131.39mm (W) ×83.64mm(H) ×17.75mm(T) Net Weight 105g Interface Description 1# 6-36V wide voltage power supply interface 2# USB interface, UART1 can be selected 3# FLASH expansion module, 3 FLASH modules can be expanded 4# 2.54mm through-hole pad, to draw the user resource interface, 20 IO ports, 3 UART serial ports, and 1 CAN port 7 AD ports and 2 PWM ports 5# JTAG interface, connect to HME05 emulator, or connect to PGT05 burner to burn the underlying core firmware. External Interface PIN Definition Description 1# GND Common ground 2# RX4 UART4 Data reception 3# RX5 UART5 Data reception 4# P01 I / O mouth 5# CRX CAN interface data reception 6# RX2 UART2 data receiving 7# P07 I / O 8# P15 I / O 9# P17 I / O 10# P21 I / O 11# P23 I / O 12# P25 I / O 13# P27 I / O 14# P31 I / O 15# P33 I / O 16# FTX FSK transceiver data reception 17# ADC0 AD input 18# ADC2 AD input 19# ADC5 AD input 20# ADC7 AD input 21# PWM1 16bit PWM output 22# VCC power input 23# TX4 UART4 data transmission 24# TX5 UART5 data transmission 25# P0.0 I / O 26# CTX CAN interface data transmission 27# TX2 UART2 data transmission 28# P06 I / O 29# P14 I / O 30# P16 I / O 31# P20 I / O 32# P22 I / O 33# P24 I / O 34# P26 I / O 35# P30 I / O 36# P32 I / O 37# RST System reset input 38# FRX FSK transceiver data transmission 39# ADC1 AD input 40# ADC3 AD input 41# ADC6 AD input 42# PWM0 16bit PWM output Application