10.1 Inch Cheap HMI with Touch DMG10600C101_15WTR(Commercial Grade)

Video Specification ASIC T5L2 ASIC Developed by DWIN. Mass production in 2019,1MBytes Nor Flash on the chip, 512KBytes used to store the user database. Rewrite cycle: over 100,000 times Hardware and interface description LCM interface FPC50_0.5mm, RGB interface RTP interface Resistive touch panel: 4Pin_1.0mm interface User interface 8Pin_3.81mm socket for power supply andserial communication. Download rate(typical value): 12KByte/s Flash 16MBytes NOR Flash, for fonts, pictures and audio files. Rewrite cycle: over 100,000 times Expand Flash Expandable to 64Mbytes NOR Flash or 48Mbytes NOR Flash+512Mbytes NAND Flash Buzzer 3V passive buzzer. Power: <1W RTC Button cell for power supply. Accuracy: ±20ppm @25℃ SD card interface FAT32. Download files by SD interface can be displayed in statistics Reserved module interface Wi-Fi module: connect to the cloud platform to update remotely USB module: download files by USB flash disk PGT05 interface When product crashes by accident, you can use PGT05 to update DGUS kernel and make the product return to normal Display Parameters LCD Type IPS, TFT LCD Viewing Angle Wide viewing angle, 85°/85°/85°/85°(L/R/U/D) Resolution 1024×600 pixels (support 0°/90°/180°/270°) Color 24-bit 8R8G8B Active Area (A.A.) 223.2mm (W)×125.8mm (H) Backlight Mode LED Backlight Service Life >20000 hours (Time of the brightness decaying to 50% on the condition of continuous working with the maximum brightness) Brightness DMG10600C101_15WTR: 250nit Brightness Control 0~100 grade (When the brightness is adjusted to 1%~30% of the maximum brightness, flickering may occur and is not recommended to use in this range) Note: You can use dynamic screen saver wallpapers to avoid afterimages caused by fixed page display for a long time. Touch Parameters Type RTP (Resistive touch panel) Structure ITO film + ITO glass Touch Mode Support point touch and drag Surface Hardness 3H Light Transmittance Over 80% Life Over 1,000,000 times touch Serial Interface Parameters Mode UART2: RS232 UART4: RS485 (Only available after OS configuration) UART2 Voltage Level Test Condition Min Typ Max Unit Output 1 - -5.0 -3.0 V Output 0 3.0 5.0 - V Input 1 -15.0 -5.0 - V Input 0 - 5.0 15.0 V UART2 Baud Rate 3150~3225600bps, typical value of 115200bps UART4 Voltage Level Test Condition Min Typ Max Unit Output 1 2.5 5.0 - V Output 0 - -5.0 -2.5 V Input 1 0 2.5 - V Input 0 - -2.5 -0.2 V UART4 Baud Rate 3150~921600bps, typical value of 115200bps Data Format UART2: N81 UART4: N81/E81/O81/N82 ,4 modes (O Sconfiguration) Interface Cable 8Pin_3.81mm Socket Electrical specifications Rated Power <5W Operating Voltage 6~36V, typical value of 12V Operating Current 350mA VCC=12V, max backlight 120mA VCC=12V, backlight off Recommended power supply: 12V 1A DC Operating environment Operating Temperature -20℃~70℃ (12V @ 60% RH) Storage Temperature -30℃~80℃ Operating Humidity 10%~90%RH, typical value of 60% RH Conformal Coating None Application